Description

Description:
Illuminated SA Hunter Reticle
As suggested by the model number, Lynx LX3 2.5‑15×50 SA Hunter is fitted with the tried and tested SA Hunter reticle that is easy to use and provides aiming points that compensate for distance as well as cross-winds. Calibrated in metres for distance and km/h for wind, SA Hunter reticle works with most popular hunting and varmint calibres. The bold reticle lines are easily visible in poor light but still thin enough for accurate shot placement on small targets. A small red centre cross lights up dead-centre to make the aim point more easily visible at night with minimal effect on your night vision.

Side Focus & Reticle Illuminator
Parallax is focusable from 35 metres to beyond infinity. The parallax adjustment wheel is mounted on the side of the scope alongside the illuminator switch, which can be turned on and off to one of 11 brightness settings with a single click.

Windage / Elevation Adjustment Controls
Pop-up ¼ MOA adjustment controls make it a snap to shoot the scope in.

Specification:
Magnification: 2.58x 14.91x
Exit pupil diameter (mm): 11.6 3.4
Eye-relief (mm): 99 98
Actual FOV: 8.22° 1.42°
Dioptre adjustment: -2.5D to +2.5D
Objective diameter: 50mm
Total Windage adjustment range: 70 MOA
Total Elevation adjustment range: 70 MOA
Tube diameter: 30mm
Tube material: Black hard anodized aluminium (HV300)
Water proof: Positive internal pressure 300kPa. Submersible 1m for 60 minutes.
Recoil proof: 1000G 1ms x 1000
Fog proof: Dry nitrogen purged
Temperature operating range: -20 to +71°C
Reticle Illuminated SA Hunter
Battery type: CR2032
Switch type: Mechanical saddle mounted. 10 brightness settings. Instant off/on.
Parallax: Side focus
Eyepiece: European-style fast focus
Antireflective lens coating: Fully multi coated
Light Transmission: 87.98% (day) | 86.40% (night)
Windage / Elevation control Target/Tactical with zero stop on elevation
Windage click value: 1/4 MOA
Elevation click value: 1/4 MOA
Length: 381mm
Weight: 780g
Country of manufacture Japan